How can I switch between DPM and LSM mode on PowerPc DualCore MPC5675K devices ?

Dual processor mode and lockstep mode is configured inside the Shadow Flash.

The actual state could be observed using the SSCM User Option Status Register (UOPS). The mode could be switched using address 0x0020_3E18 in the Shadow flash. Bit 0x0040_0000 has to be set for LSM and cleared for DPM mode.

For switching mode with UDE® connect to the target using the actual mode. Activate the Shadow flash and clear the Automatic sector erase before program and activate the Simulate Random Access mode option. Open a memory window and go to address 0x0020_3E18. Change bit 0x0040_0000 and open Memtool and execute program.

After you have disconnected and repowered the target, the new mode will be active.

Microcontroller Architecture Support

Architectures vs UDE® Product Features

Newest TriCore derivatives AURIX TC4x, TC39x, TC27x, TC29xED, Power Architecture / PowerPC derivatives as MPC5744P, MPC5744K, MPC5746M, MPC5777M and Cortex-M0, Cortex-M0+, Cortex-M3, Cortex-M4, Cortex-M7, Cortex-R4, Cortex-R52 Stellar, Cortex-A8, Cortex-A9, Cortex-A53 S32V, i.MX25, i.MX31 derivatives, SuperH SH-2A, XC2000, XE166, XMC1000, XMC4500, STM32, Stellar, S32, S32K, S32R are supported ... read more

Microcontroller Debugging Product finder

Go to

How can I switch between DPM and LSM mode on PowerPc DualCore MPC5675K devices ?

Microcontroller Architecture Support

Microcontroller Debugging Product finder

Webinars on Debugging with UDE®

UDE® DataSheets and Manuals

Contact