STMicroelectronics ST10™ ST10F276, ST10F269, ST10F296 * Microcontrollers

UDE Debug, Trace and Test solution for STMicroelectronics ST10™ ST10F276, ST10F269, ST10F296 *

The architecture of the ST10F269 combines the advantages of both RISC and CISC processors in a very well-balanced way. The sum of the features that are combined result in a high-performance microcontroller, which is the right choice not only for today's applications but also for future engineering challenges. The ST10F269 not only integrates a powerful CPU core and a set of peripheral units into one chip but also connects the units in a very efficient way. One of the four buses used concurrently on the ST10F269 is the XBUS, an internal representation of the external bus interface. This bus provides a standardized method of integrating application-specific peripherals to produce derivatives of the standard ST10F269.

* C16x/ST10 related products and services are available for existing projects only. Not for new projects.

50 ns minimum instruction cycle time, with most instructions executed in 1 cycle
16 x 16-bit multiplication, 40-bit Accumulator
Multiple high-bandwidth internal data buses
Register based design with multiple variable register banks
Single cycle context switching support
16 MBytes linear address space for code and data (von Neumann architecture)
System stack cache support with automatic stack overflow/underflow detection

Bit, byte, and word data types
Flexible and efficient addressing modes for high code density
Enhanced boolean bit manipulation with direct addressability of 6 kbits for peripheral control and user defined flags
Hardware traps to identify exception conditions during runtime
HLL support for semaphore operations and efficient data access

2 kByte internal RAM for variables, register banks, system stack and code
up to 10 kByte on-chip high-speed XRAM for variables, user stack and code (not on all derivatives)
up to 256 kByte on-chip Program FLASH Memory (not for romless devices)

Multiplexed or demultiplexed bus configurations
Segmentation capability and chip select signal generation
8-bit or 16-bit data bus
Bus cycle characteristics selectable for five programmable address areas

56 interrupt nodes with separate interrupt vectors
240/400 ns typical/maximum interrupt latency in case of internal program execution
Fast external interrupts

Interrupt driven single cycle data transfer
Transfer count option (standard CPU interrupt after a programmable number of PEC transfers)
Eliminates overhead of saving and restoring system state for interrupt requests

16-channel 10-bit A/D Converter with programmable conversion time (4.85 us minimum), auto scan modes, channel injection mode
Two 16-channel Capture/Compare Units with 2 independent time bases each, very flexible PWM unit/event recording unit with different operating modes, includes four 16-bit Timers/counters, maximum resolution fCPU /8
4-channel PWM Unit
Two Multifunctional General Purpose Timer Units GPT1: three 16-bit timers/ counters, maximum resolution fCPU /8 GPT2: two 16-bit timers/counters, maximum resolution fCPU /4
Asynchronous/Synchronous Serial Channels (USART) with baud rate generator, parity, framing, and overrun error detection
High Speed Synchronous Serial Channel programmable data length and shift direction
Two On-Chip CAN Bus Module, Rev. 2.0B active (30 or 2x15 Message Objects)
Watchdog Timer with programmable time intervals
ASC Bootstrap loader for flexible system initialization
CAN Bootstrap loader for flexible system initialization

STMicroelectronics ST10 Microcontrollers supported by UDE

ST10F251 ST10F252 ST10F269 ST10R271 ST10R272 ST10R273 ST10F275 ST10F276 ST10F280 ST10F282 ST10F296
ST10R163 ST10F163 ST10R165 ST10R167 ST10F167 ST10F168 ST10F169 ST10R172